Last Modified: 11-29-2007 1.6 A
Service Category: Engine/Hybrid System Section: Engine Control
Model Year: 2008 Model: Sequoia Doc ID: RM000003BAF001X
Title: 2UZ-FE ENGINE CONTROL: POWER STEERING OIL PRESSURE SWITCH: REMOVAL (2008 Sequoia)

REMOVAL

1. REMOVE THROTTLE BODY COVER SUB-ASSEMBLY 2UZ-FE ENGINE CONTROL: THROTTLE BODY: REMOVAL (2008 Sequoia)+

2. REMOVE AIR CLEANER HOSE ASSEMBLY 2UZ-FE ENGINE CONTROL: THROTTLE BODY: REMOVAL (2008 Sequoia)+

3. DRAIN POWER STEERING FLUID

4. REMOVE POWER STEERING OIL PRESSURE SENSOR

(a) Disconnect the power steering oil pressure sensor connector.

(b) Using a 24 mm deep socket wrench, remove the power steering oil pressure sensor.

(c) Remove the O-ring.